Wooden train set overpass
Description
If you hate the original wooden or plastic (green) BRIO pieces used to elevate the track, this is for you. The connected track pieces will not fall off when slightly bumped nor will they slide out from underneath, unlike the BRIO ones. Tested to fit BRIO wooden train set parts. You may have to scale the parts to 1000% before printing. Use screws or bolts to fasten the parts together. I used 14mm/0.55in M3 bolts. Optional: Apply a small amount to super glue on the surfaces that are touching before screwing the pieces together. UPDATE #1: included a longer track piece (...c-long.stl) that can fit two track pieces to go under it.
Statistics
Likes
40
Downloads
0