Lack Leg Support
Description
Ikea Lack End Table Leg Support ==================== Lack coffee tables sure are great for the price but they're also super flimsy & jiggly. --------------------- Their jigglyness makes using them as a printer stand a bit problematic. For that reason, I went ahead and threw together this bracket that makes the legs much more rigid. Supplies needed: --------------------- * 4 of these brackets * 5 1/4inx1in lag screws per bracket (or similar size) Instructions: --------------------- 1. Apply woodglue to the bottom of the legs before screwing them down into the table top. This alone, will make the table more sturdy. 2. Print 4 brackets --STL found here 3. Use one of the brackets as a guide to pre-drill the 5 holes per leg. These larger screws will crack the legs otherwise. 4. Use the 1/4"x1" lag screws to attach the brackets to the table (you'll need 25 screws total) optional: I went ahead & applied woodglue underneath the brackets because I'm paranoid.
Statistics
Likes
6
Downloads
0