E3D V6 X Carriage Mount W/ 2XDuct Fans
Description
A Custom E3D V6 Holder using 40mm ducted fans and a E3D Clone. I was able to 3D Print this in a couple of hours (1.5 to 2 HRS) using 0.2mm Z layer height with a 0.4mm nozzle. Support is needed however, not essential if you have a fan shroud. If you choose to use support use support only from build platform is needed, not everywhere because it is not necessary whether you have a shroud or not. Its just a tip to save you material. :) Distance between Linear Bearings are 22.6 mm. All bolts are 3mm except the 25x5mm bolts that hold the belt. 3mm bolts are a variety of lengths so it would be easier to have an assortment of bolts.
Statistics
Likes
2
Downloads
0