Pushrod Clip
Description
In 3d printed RC planes from 3Dlabprint control arms are relatively thick (about 4-6mm). I didn't want to use z-bend pushrods, so i decided to design pushrod clips. The clips are intended for a pushrod with a diameter of 1 and 1.2 mm Print settings (very important!) Print from PETG In high temperature (min 235oC) Without cooling of printed elements. Slow speed (30 - 40 mm/s) Print at least 10 clips at a time After printing, be prepared for long postprocessing with a sharp knife and drills My other designs for 3dlabpint p-38: Motor mount: https://www.thingiverse.com/thing:4078761 Wheels: https://www.thingiverse.com/thing:4078785 Spinners: https://www.thingiverse.com/thing:4078812 ESC mount: https://www.thingiverse.com/thing:4175154
Statistics
Likes
8
Downloads
0