Universal BTT SKR V1.3, V1.4 & V2
Description
This is a modification of my Universal Einsy Box to be used by a BTT SKR V1.4 (also V1.3) while maintaining all the advantages and properties of it, like Raspberry modules, compatibility with Zaribo, Bear and Stock frames and more. NOTE 1: Other parts (like Fan covers, Raspberry modules and more) are here: https://www.thingiverse.com/thing:3901001 NOTE 2: The Bear ends and Raspberry Bear modules are here: https://www.thingiverse.com/thing:4210933 Optional: there is a cuttable port to add an esp8266 board with its cover. Also can be installed on an aux board slot, so it needs a cable (see the pictures). Anchor_SKR_Bear_Short_1 is for Bear Ends and Anchor_SKR_Bear_Short_2 is for Raspberry Bear Modules. Printed and checked. ###**Updates:** 2020/02/26: + The distance between the two left holes (main cover) now is 71.5mm so a 80x80 fan can be attached by using them. 2020/03/04: + Micro SD port now is a bit bigger. 2020/03/07: + Now the box is 10mm higher so there is more room for power and others cables. 2020/03/08: + Added anchors (Bear and Zaribo, Stock does not use them) because now the box is 10mm longer. 2020/03/25: + Improved USB and SD card ports 2020/03/27: + Improved additional boards slot 2020/04/02: + Move frame holes 2mm towards heatbed to prevent hitting X-Motor on Bear frames. 2020/05/11: + I have angled up 30 degrees the heatbed port. + Removed one tab (from additional boards slot) to improve accesibility to near screw. 2020/06/15: + Added a nylon hole on the extruder port. + New improved hex ventilation grid (no longer print on the air). 2020/09/18: + Now heatbed port is 25% bigger. 2021/05/21: + NEW! SKR V2 Body added. Thanks to HackerJack42 for his valuable testing and feedback. Note: Bear logo is different! 2021/06/02: + SKR V2 Body improved. + Added a SKR 2 Body with thread inserts. **2021/10/02:** + Added Caribou logo
Statistics
Likes
252
Downloads
0