Putty Knife Holder for Ender 3 Pro with MEAN WELL Power Supplies
Description
This is a remix of the putty knife holder by BelkinWA specifically for the Ender 3 Pro with MEAN WELL power supplies. I changed the dimensions of the rectangular pegs to fit snugly into the holes on the back of the power supply. I also lengthened the shaft slightly and added a small lip at the end to prevent the putty knife from falling off. My print settings on the Ender 3 Pro were as follows, as exported from Creality: Material: SUNLU Black PLA Nozzle Size: 0.4 mm Line Width: 0.4 mm Layer Height: 0.12 mm Infill: 20% Nozzle Temperature: 210 C Bed Temperature: 70 C Print Speed: 50 mm/s Supports: Everywhere Calculated Print Time: 40 min. You can also use regular PLA at lower hotend and bed temperatures (200 C and 60 C, respectively). The SUNLU brand of PLA I used requires a little more heat than standard PLA. I am new to Thingiverse, so I welcome you to try out this part for yourself, comment, post makes, and like/collect if you desire. Thank you, and happy printing!
Statistics
Likes
11
Downloads
0