Anet A8 X mounts Prusa nuts, 46.2mm rod spacing
Description
I bought this "Original Prusa Rods" for the X-Axis: https://www.amazon.de/gp/product/B07Z1CPQJY And i make a re-disign from Leo_N X-Carriage Mounts to fit them. I add another way for the cable of the micro-switch. The rods a fixed with 15mm M4 and 20mm M3 screws without nuts (self-tapping). The right mount have an holder for my webcam (5mm spacing) or for anything else you want to attach there). When i print i have the "all inner holes are 0.4mm to small" problem (Simplify 3D) - so i make all inner holes 0.4mm bigger as needed. The RSDOC are added so you can easy resize every hole with DesignSpark Mechanical. I export the STL with 1.5° for perfect curves and circles (see Screenshot) i added 2 "with helper" Versions - they have circles at the corners for the first layer, height is 0.16mm. I used them for anti-wraping. They are easy to remove. I also add my Version of the belt Tensioner with 64.2mm spacing. I change the inner space for 8.5mm width bearing with tooth.
Statistics
Likes
12
Downloads
0