Ford FlatHead V8 (6/14) / Alternator add-on
Description
This is an Alternator add-on for the Ford FlatHead V8 (https://www.thingiverse.com/thing:2537602). This design is planned to receive a supercharger soon. # Release 24/03/2020 : New AlternatorHolderPulleyV2 (it replace AlternatorHolderPulley) with deeper groove to prevent the belt from jumping. # Print Settings 1 x AlternatorBack : Layer:0.15mm Raft:no Brim:no Support:yes Infill:100% 1 x AlternatorBody : Layer:0.15mm Raft:no Brim:no Support:no Infill:100% 1 x AlternatorFront : Layer:0.15mm Raft:no Brim:no Support:yes Infill:100% 1 x AlternatorHolder : Layer:0.15mm Raft:no Brim:no Support:yes Infill:80% 1 x AlternatorHolderPulleyV2 : Layer:0.15mm Raft:no Brim:no Support:yes Infill:80% 1 x AlternatorLock : Layer:0.15mm Raft:no Brim:no Support:yes Infill:80% 1 x AlternatorPlug : Layer:0.15mm Raft:no Brim:no Support:yes Infill:100% 1 x AlternatorPulley : Layer:0.15mm Raft:no Brim:no Support:no Infill:100% 1 x AlternatorPulleyCover : Layer:0.15mm Raft:no Brim:no Support:no Infill:100% 1 x AlternatorRotor : Layer:0.15mm Raft:no Brim:no Support:yes Infill:20% # Accessories 4 x 623zz bearing 3 x m2x3mm SHCS 4 x m2x8mm SHCS 2 x m3 threaded insert 2 x m3x16mm SHCS 4 x m3x22mm SHCS 3 x m3x25mm SHCS 2 x m3x40mm SHCS 3 x m3 jam nut 6 x m3 lock nut 2 x m3 acorn nut 18 x m3 washer 5 x m3 lock washer 1 x 3mmx10mm threaded rod 1 x 3mmx62mm threaded rod # Mounting Look at pictures.
Statistics
Likes
26
Downloads
0