Elna Lotus Sewing Machine Panel Latches
Description
These are small latches that press-fit onto the metal ends of the panel latches for the Elna Lotus line of sewing machines. Mine had broken off of the machine, leaving a thin piece of metal sticking out at each of the fold-up panels. These 3D pieces slide over those metal 'fingers' and hold the panels in place when closed. There are two variations, one to fit the front and rear latches and a second design to fit the end latch. On my machine the metal for the end latch has a twist to it, requiring a taller slot in order for the part to slide onto the metal. Also note that my printer is on it's last legs, and it's accuracy is suspect. These may print out differently for you (I'd expect they may be loose). I left some slop in the width measurements so you should be able to scale this down a bit if necessary to achieve a tighter fit.
Statistics
Likes
2
Downloads
0