Caterpillar - modular and articulated
Description
Simple <b>modular and articulated Caterpillar</b> made for base of fridge magnet. Connector is with little rim to hold parts together when you will lift them up. Print one head, one head-connector (with or without stopper [it stops the head from turning too much]) and as many base + connector models as you want. If you don't want to connect caterpillar parts together and use less filament just print the head and bases without any connectors. Printed with 0.4mm nozzle, 0.1-0.2 layer height and gradual infill set to 50% (so it was ~10-50%)
Statistics
Likes
4
Downloads
0