USBtin D-SUB case
Description
This is a case for the USBtin (https://www.fischl.de/usbtin/) CAN bus USB adapter. The design is intended to protect the PCB and at de same time adapt to the widely used D-SUB connector. The lid should click in place nicely but is not intended to be totally tight. I used two M2*4 self tapping screws to fix the PCB in place. For the D-SUB connection you will need a standard panel mount female d-sub connector socket and matching mounting bolts. Then just solder the CAN wires to the D-SUB interface and use the screw terminals to connect to the USBtin.
Statistics
Likes
3
Downloads
0