K40 ADJUSTABLE TABLE REMIX
Description
Many thanks for the original design, this is very cool and useful. I have redesigned just the top and bottom corner bracket in order to fit a 12mm by 12mm square steel tube without the use of glue or anything. (tight fit) In addition to that i have added a T-piece to add support struts in the middle of the top part of the table (1 OR 2 as preferred) If you want to build one in the same way i did, you need to print 4X the bottom corner bracket and 4X the top corner bracket + 2 OR 4 t- pieces (the Photo has not included the modified bottom corner brackets yet) In addition to that you will have to purchase 12x12mm steel tubing (4x 240mm lenght + 4x 290mm lengh + 1 OR 2 pieces for the intersection.) Lenght to be adjusted as required. Also required: 4x 608ZZ Bearings (AMAZON) 3x M8 Threaded rod (10CM)(LM) 1x M8 Threaded rod (12CM) (LM) 4X GT2 Pully + GT2 Belt (AMAZON) Belt tensioner as required (AMAZON) for more infos please visit original design: https://www.thingiverse.com/thing:2299337
Statistics
Likes
14
Downloads
0