DLYFULL T5 Cooling Addon (18650 Charger)
Description
DLYFULL T5 Cooling Addon ========================= I found while charging various 18650s that the temperature was all over the place. I wanted a way of knowing if it was the cell causing the temperature increase or the unit so I created this. It uses a 5015 fan(12v) to cool the PCB, however a little bit of air can escape and cool the 18650 (good or bad). It uses the original screws (2 on each corner top and bottom, add more screws if you have them) with the exception of the needing some M3 screws to mount the 5015. You will 100% need supports for the corners and it can be a bit of a fiddle. Use a small screw driver and insert INTO the bottom whole to screw the top screw down. The fan is soldered directly on to the DC jack (see picture). 5015 Fan (12v) : [eBay](https://ebay.to/3agR4yU) | [Banggood](https://www.banggood.com/custlink/DmDmUd42wZ) M3 Screws : [eBay](https://ebay.to/2TblRWT) | [Banggood](https://www.banggood.com/custlink/DDKmMd4fvn)
Statistics
Likes
1
Downloads
0