M5 Stuart Tank Sprocket for FOV 1/6 scale tank
Description
This can replace the sprocket on the 1/6 scale M5 Stuart Tank that was manufactured by Forces of Valor. I made it to go with 3D printed tracks that represent the actual tracks used by the tank not the ones that came with the remote controlled version. Those have the track guide in the center of the track as opposed to on the track ends. The hub should fit on the stock shaft. Print two sprockets for each assembly. I made it so every other bolt is fake as you don't need to have so many. I used 4-40 hex head screws and slowly tapped the holes in the hub with a 4-40 tap. You can enlarge the holes and glue the screws in also if you don't want to deal with the tapping.
Statistics
Likes
2
Downloads
0