Ikea Samla 22L Filament Drybox
Description
Yet another filament drybox for Ikea Samla 22l. It's mostly a remix/collection by other people. I've contributed with the PTFE tube connectors, but you can of course use whatever connectors you wish. There are plenty of them. I've also included a poor mans roller, where you don't have to use 608 bearings. It uses the stands from [Minimalist Samla 22L and 65L Filament Storage](https://www.thingiverse.com/thing:3638817), but instead of a threaded rod I use plain rods with a small printed clamp to hold the bearings in place. Parts ==== Stand ----- * 2x 8x338 mm rod/pipe. I use aluminum rods. * 4x stands for rods/pipes: I use the very fine stands from [Minimalist Samla 22L and 65L Filament Storage](https://www.thingiverse.com/thing:3638817). * 8x M3x6 screws. Rollers ------- This depends on how many spools you wish to have. It fits 5x 50 mm wide spools. For one spool you need: * 4x 608 bearings. * 4x [v groove for 608 bearings](https://www.thingiverse.com/thing:2425723). ...or, if you don't want to use metal bearings * 4x Roller.stl (they work ok, but that's about it. Bearings are preferred) You also need: * 8x Clamp.stl to hold the rollers in place. If you fit 5 spools, you only need one clamp between the spools, so you need 32 clamps in total. PTFE connectors --------- You can use [either M6 or M10 connectors](https://www.amazon.de/dp/B07Q85LHRZ/ref=sr_1_1_sspa?crid=31YOD5S82BKOZ), or both. For 5 spools you need: ### For M6 connector * 5x PFTE M6 Bolt.stl * 5x PFTE M6 Nut.stl ### For M10 connector * 5x PFTE M10 Bolt.stl * 5x PFTE M10 Nut.stl You need to drill a 10 mm hole for each connector. I recommend printing them in PETG for strength. It's a tight fit. Lid --------- * 4x [Lid clips for the smaller IKEA SAMLA storage boxes](https://www.thingiverse.com/thing:393890). I enlarge the z axis to make them 50 mm long. * Sealing strip for a snug fit. Desiccant ------- * I use 1 kg of [silica gel](https://www.amazon.de/dp/B07H2FFKZ5/ref=sr_1_2_sspa?crid=1FPFMUEP74ATM). Thats it. If you like this thing, please like these too: [Minimalist Samla 22L and 65L Filament Storage](https://www.thingiverse.com/thing:3638817), by [Dombi Szilárd](https://www.thingiverse.com/Dombi3D/about) [v groove for 608 bearings](https://www.thingiverse.com/thing:2425723), by [keith brigadier](https://www.thingiverse.com/Ratm3at/about) [Lid clips for the smaller IKEA SAMLA storage boxes](https://www.thingiverse.com/thing:393890), by [Thomas Flummer](https://www.thingiverse.com/flummer/about)
Statistics
Likes
103
Downloads
0