Upgrade CNC Laser / for Eccentric Spacer
Description
ALL THESE VERSIONS OF PARTS HAVE NOT BEEN TESTED, BE CAREFUL THERE MAY BE ERRORS !!! Y-Left -> It is a version of the part of the Y axis (left part), I removed the spacers embedded in the support to be able to put real metal spacers and eccentric spacer for the third bearing. Y-Left-Motor -> Like the Y-Left but I put a hum of 2mm if we want to put two motors on each side of the axis without using a smooth bar of 8mm. The belt is directly on the branch of the engine so it has to be advanced and that's what I did. Y-Right: It is a version of the part of the Y axis (right part), I removed the spacers embedded in the support to be able to put real metal spacers and eccentric spacer for the third bearing. X-Back -> It's a remix of X-Back, there were four slots for four bearings and I removed one so that there are only three like on the Y axis. I also removed the flanges for powers put real spacers and an eccentric spacer. X-Front -> It's a remix of X-Front, there were four slots for four bearings and I removed one so that there are only three like on the Y axis. I also removed the flanges for powers put real spacers and an eccentric spacer.
Statistics
Likes
5
Downloads
0