Micro Mesh wet sanding station (V1 and V2) now with a top
Description
This is a caddy that holds your micro mesh pads and some water for wet sanding on a wood lathe. It allows for water to move between the main reservoir that is used to wet the pads during sanding, into the cells that hold that pads to keep them wet during during use. When you're done simply dump the water out of the main reservoir and these holes allow water to drain away for the pads to dry. Update. I recently updated the base of this design to version 4 which added a magnetic top to cover the micro mesh pads. While I wasn't able to retrofit the magnet mounting system for the previous designs I didn't want people who printed the earlier versions to be left our. I've added an STL file for the top that matches the V1 or 2 versions of the design. The addition of the cover allows the pads to be protected from shop dust and include venting to allow some air moment as the pads dry. With the top in place you can simply put the cover back on and while holding it in place dump the water out without worrying about your pads falling out of their spot
Statistics
Likes
14
Downloads
0