Zesty Nimble Hotend Harness Clamp
Description
I used the Nimble Bowden Holder, https://www.thingiverse.com/thing:3384514, to secure the bowden tube to the Nimble Drive cable. While trying to figure out how to secure the hotend harness up so it wouldn't catch on the filament spool, I thought about the bowden holder I was using would work if it was a bit longer and the other end was larger. The hole is 8mm. I built it in TinkerCAD using the bowden holder as a model. Secure with M3 or 4-40 screw and nut. This was designed for a SeeMeCNC Artemis 300 hotend harness and is a bit loose, but should work for any harness that is 8mm or less in diameter.
Statistics
Likes
3
Downloads
0