BLV MGN Cube -2GT 10mm belt and big bearing(F635zz) upgrade
Description
(此项目正在进行最终测试，欢迎提供宝贵建议！)(此处提供下载的只包括修改部分，余下STL文件请在https://www.thingiverse.com/thing:3382718此处下载) 首先，这个修改源文件来自于BLV MGN Cube - HTD 3M 9mm belt upgrade by DruckiMCDruck ，感谢 DruckiMCDruck ！ 我为什么要修改:这个修改相对于BLV原版改进了宽皮带，我很喜欢，使用中也没发现什么问题，但是我发现这个同步轮所使用的轴承不是很耐用，更换起来很麻烦，我想如果可以把同步轮换成大一点的轴承就很完美了，于是便有了下面的内容！ (this project is undergoing final test, welcome to provide valuable suggestions! )(Only the modified part is available for download here. Please download the remaining STL files here at https://www.thiniverse.com/thing: 3382718） First of all, this modification source file comes from BLV MGN Cube - HTD 3M 9mm belt upgrade by druckimcdruck, thank you druckimcdruck! Why I need to modify: compared with the original BLV, this modification improves the wide belt, which I like very much, and I don't find any problems in use. However, I find that the bearing used by this synchronous wheel is not very durable, which is very troublesome to replace. I think if I can change the synchronous wheel into a larger bearing, it will be perfect, so I have the following content!
Statistics
Likes
21
Downloads
0