Anchor Trolley Backing Plate
Description
Decided to upgrade my YakAttack Anchor Trolley. This is a backing plate that can be used for the pulleys and the leverloc. The nut slot will take a #10 US Machine Nut of your choice. Just superglue nut to hold in place. Printing with PETG is highly recommend to hold up because of the outdoor use. Recommended Printing Settings: Layer height of .15mm with 6 perimeters will give this part the most strength. Hole Centers: 30mm & 35mm Hardware Needed: US Machine Screw & Nut #10
Statistics
Likes
4
Downloads
0