SKR Pro 1.1 Case
Description
Case is primarily intended for use with Bigtreetech SKR Pro 1.1. It is usable for Bigtreetech SKR 1.4 board and "in emergency" for Anet A8/A6 Board (only inside, has to be opened to access all ports). Case is designed to be mounted on V-shaped 2040 aluminium extrusion frame (ie Anet AM8/BLV MGN Anet A8 mod). 40 mm fan can be mounted at the bottom and there is wind tunnel that directs most of the air over stepper drivers. It consists of 4 parts: - case - lid - support - spacer (4x, used to select which board can be mounted) Additionally you will need: - 10x M5 8mm screws for attaching case to frame - 10x M5 T-nuts - 4x M3 8mm screws for attaching support to case - 4x M3 15mm screws + 4x M3 nuts for attaching board to case - 4x M3 10mm screws for attaching the lid (anything between 6 and 20 mm should be fine) - 1x 40x40x10mm fan + 4x M3 15mm screws + 4x M3 nuts (optional) Update: Added SKR_Pro_Case_larger_holes - as name suggests, holes for cables are much larger. I underestimated the size in the original design and it was extremely tight.
Statistics
Likes
40
Downloads
0