Traxxas 4-tec 2.0 Thick(er) Battery strap (36mm tall batteries)
Description
I ordered a Zeee battery online (hardcase 3s lipo, 5200mah) and discovered that it was a little thicker than the Original post, so I edited the original make just a more than 2mm taller while trying to maintain the same original shape and fit. It's not a perfect remix but it's more than functional and works great for holding my battery down! Special thanks to user sashan13 (https://www.thingiverse.com/sashan13/designs) for posting his make just before I discovered I needed to make a new strap myself, this saved me a ton of time measuring one up! It works in PLA, however I suggest you print it with THICK walls and nearly solid infill. I used 1.6mm walls with 80-90% infill and it feels more than strong enough to last me awhile. I DID touch up the screw hole with a drill afterwards as it was a hair undersized, and didn't want to crack the filament trying to force the screw through it. Found it prints best on it's side, use supports everywhere to make sure the screwed in side of the arm is straight and functional.
Statistics
Likes
6
Downloads
0