Pliers FPV Motors
Description
Pliers for motors of FPV drone racer Update -> Thickness 14mm instead of 10mm (too much fragile) For 28 mm diam. motors Print both pliers arms in PLA (or PETG) and the clamps faces in TPU (2x), then you can glue the TPU parts on PLA with a thin layer of contact glue like Bostik or similar You need also a M3x8 mm screw and a M3 nut I print the pliers parts with infill of 50% and the TPU clamp faces infill 0% (no infill) and 2 perimetric line and 2 top and bottom layers. So they will be softer and the grip on motor surface will be best.
Statistics
Likes
33
Downloads
0