Dualshock traveled cover {PS4}
Description
Models for PS4 traveled cover .stl Printed on Anet A8. Layer Height 0.2mm cover01 - 1x cover02rl - 1x (this part need support, lay lift) cover03 - 2x Some little nails. 1) You must at first print every parts 2) Sitck with glue cover01 and cover03 3) Stick or heat the nails to cover01 4) Reduce the nalis and assemble cover01 with cover03 5) Done You are going to be careful, if you assemble parts.
Statistics
Likes
5
Downloads
0