Chain Chomp Dual Extrusion 4 Color
Description
Peach's Chain Chomp Aka Bow Wow Printable on a 2 color machine with pauses at certain layers to result in 4 colors, but it looks good in 2 colors as well. No assembly, support required. Printed in 1 peice on a 2 nozzle machine on the first go, 2 filament changes for a 4 color model, printable on a 2 color machine, with no glue needed. I printed black part at 3shells 20%infill and secondary model at 5 shells and 30 infill as that includes the chain, 0.4mm nozzle and 0.125mm Layer height. I Added pauses at certain heights to change filaments. Be VERY careful about selecting the correct layer to pause on, as a couple of spots do not have any tolerance in either direction. My color layout and layers to pause at. Start- Black and NonShiney Silver 1 After Chain Before tongue - Black w Red 2 After tongue but before teeth(picky) - Black w White the teeth and eyes have to be the same color.
Statistics
Likes
55
Downloads
0