Chiron Dual Y-Axis Stepper Bracket
Description
Pictured is the V5 version, which is thicker, however may require higher clearance provided by the linear rails to work. V6 on the other hand has been modified to allow for that clearance, and is a safe bet for a stock Y carriage setup with rollers. Report back on its functionality. Requirements: - 2x M3 Pan-Head Allen Bolts - 2x M3 T-nuts / Boat nuts - 2x M4 Allen Bolts - 2x M4 T-nuts / Boat nuts - Nema 17 stepper (I'm using the one from the extruder as I've switched to a pancake stepper there). - 16T 10mm wide 5mm bore pulleys: https://www.amazon.com/gp/product/B07BH26P2D Remix, and report back with any issues. I have the two Y steppers connected in parallel on my stock board with TMC2208 steppers and stock OS, running slightly higher voltage to feed both (1v).
Statistics
Likes
3
Downloads
0