Fly Press
Description
One Of My Favorite Tools When Blacksmithing. It Is A Good Example Of A Mechanism That Can Apply Mechanical Advantage Precisely And Abruptly With No Motor Force. … The Files Are Posted ~1/4 Scale From The Originals [Near Max Printable Volume On A Rep2] Hence, The Tolerances Are Not That Good. Total Build Time ~ 15 Hours 47 Minutes Video Of Flypress6X Here: Http://Youtu.Be/Mpqmicc4Ieq Recommended Settings: 2 Shells 10-15% Infill Use Support. Be Sure To Check The Bill Of Materials [Bom] You Will Need To Print 2 Of The Flyramguide6X … Print @ 50%Scale For The "Dime Photo" Version Total Build Time ~ 3Hours 40 Minutus … This Was One Of The First Assemblies I Designed In Solidworks. Special Thanks To Bethany And Renuka For The Data [ Sifting, Transfer, Conversion, Etc] And The Push To Put Out One Of My Cooler Old Pieces.
Statistics
Likes
66
Downloads
0