Filmclip version 2 incl film hanger and squeegee
Description
This version is based on the previous post: https://www.thingiverse.com/thing:3152983 These clips are more robust and rigid compared to the previous ones. There are three versions: Universal film clip that can be used for 135, 120 and equivalent film. stl files: a) film clip universal_1.stl b) film clip universal_2.stl The other one is made for 135 film and will hold the film by the sprocket holes. stl files: a) film clip 135_1.stl b) film clip 135_2.stl The third version is a film hanger than has minimal contact with your film, e.g. suitable if you are treating film strips. You may use it as hanger and/or as a weight (just make it heavier by adding a heavy screw and nut or equivalent). It may look a bit weak bit but, in my hands, the hooks are robust enough to hold a film and a weight. stl file: a) film hanger.stl As a bonus I've provided a film squeegee. Glue the parts together and fit in a mini windshield wiper. You may alter the height of "film squeegee_3" so it holds the wiper firmly. stl files: a) film squeegee_1.stl b) film squeegee_2.stl c) film squeegee_3.stl Additional material needed: For the clips: - You need the spring from a clothespin to put the two halves together. - weight, e.g. 16 mm screw/M8 https://www.ebay.co.uk/itm/221301853865 For the squeegee - Glue Loctite Super Glue - Mini Windshield Wiper like https://www.biltema.se/bil---mc/bilreservdelar/torkarutrustning/stralkastartorkarblad/torkarbladsats-stralkastare-2000029603
Statistics
Likes
37
Downloads
0