Fenders for Ownboard Bamboo/Carbon GT
Description
I made these fenders for my Ownboard Bamboo GT with Cloudwheels. These fenders use a 3/4"x3/4" rubber vibration damping stud so that they can remain somewhat flexible, this is so that if anything gets caught between the wheel and the fender, the wheel will not lock up and the fender will not break. I believe they will work with the carbon version of the board but I haven't tried so I don't know if there is enough clearance. The front trucks and motor covers may be the same on other similar boards, please comment if these worked for you on anything other than an Ownboard. There are parts required for this build and I have listed them below. Please consider donating to my go fund me page for my Shredlights fund, these fenders took hours of my spare time and any donation would be appreciated! https://www.gofundme.com/f/donations-for-shredlights-night-ops-pack?utm_medium=copy_link&utm_source=customer&utm_campaign=p_lico+share-sheet Parts list: (4x) 1/4-20 rubber mount with stud https://www.mcmaster.com/9376k19 (4x) 6-32 1" long pan head screws https://www.mcmaster.com/91772a153 (4x) 6-32 nylon insert lock nut https://www.mcmaster.com/90631a007 (6x) 1/4-20 thin nylon insert lock nut https://www.mcmaster.com/90566a029 (4x) 1/4-20 standard nut https://www.mcmaster.com/95462a029 (2x) 1/4-20 3/8" long hex head screw https://www.mcmaster.com/92240a535 *The '1/4-20 rubber mount with stud' might be the only thing you need to order from McMaster, everything else is pretty standard, but the fenders were designed for use with the McMaster rubber mount and I don't know where else you could find that exact item
Statistics
Likes
14
Downloads
0