Raspberry Pi 4B Snap Fit Multicolor Case

Raspberry Pi 4B Snap Fit Multicolor Case

Description

**NOTE:** All files are hosted at PrusaPrinters https://www.prusaprinters.org/prints/86499-raspberry-pi-4b-snap-fit-multicolor-case Snap fit design case to hold the Raspberry Pi 4 B without the need for any hardware. You can split the file into parts to have the red and green for the Raspberry Pi logo. **Some of the features I had in mind for this design** - low profile - lots of air flow while still being sturdy - red and green power lights still visible - removable GPIO cover so you can protect the pins if not in use - easy access for SD card - case can be removed and added without removing power (or any other connections on the side I believe) I have tested this to fit the connection from the Official USB-C Raspberry Pi 4 PSU This is a work in progress because I do not have the equipment to test the mini HDMI plug fit or the ribbon cable connections on top. If someone prints this and can test these please let me know! Recommend to print in PETG or another plastic that would be more flexible than PLA I used - Overture Black PETG - Overture Red PETG - Hatchbox Green PLA (I did not have personally in PETG)

Statistics

Likes

5

Downloads

0

Category

Electronics