LiPo Battery Warner Case
Description
This thing is a printable case for the standard Chinese RC LiPo battery warner, which is plugged to the balancing cable and shows the voltage(s) of the battery and sounds an alarm, if the total voltage drops below a preset voltage value (using the tiny button on top). Some of them come without a case, only with some foam tape on the back and a heat shrink tubing around it. That's exactly for what this was made for! I tried to make it as small as possible. Therefore you need to remove the foam pad on the back (if any). If there are any long protruding wires, please cut them off also. After everything fits together nicely, put a drop of CA glue on the brackets and press both parts together (preferable with the tester inside...). There are two models of the upper shell and three models of the lower shell! * Upper shell without windows (for transparent filament) * Upper shell with window (for regular filament) * Lower shell * Lower shell with some brackets in the middle * Lower shell with some brackets on top/bottom
Statistics
Likes
23
Downloads
0