TDM 850 Handguard
Description
Handguards for the Yamaha TDM 850 (4TX). What you see here is the left-hand guard. You will need to mirror it for the right hand side. The stock bar-end use a M16 thread. I used rawl-bolts with the M8 bolt which have a 14mm OD. The rawl-bolts fit inside the guard's side with the bolt through the side's hole. Print the front on it's outer edge with a brim. After printing remove the brim and glue it to the side. The inner mount goes under the mirror and can be fitted to the guard with 3mm piece of filament.
Statistics
Likes
2
Downloads
0