PSU bottom cover
Description
This is a cover for the Newer PSU (black). I use an enclosure so I wanted my PSU outside of the enclosure. I had to lengthen my wires and didn't want them loose. So I put them in a harness just like the ones that come with the Prusa printers (MK3s). I didn't like the bottom cover on the PSU. It left my wires loose and they move around and eventually would ware out. I wanted them held down so I created from the ground up this new cover. For aesthetics, I even put the Prusa logo on there. This is designed for a 1/2" harness. I will put the link bellow for whom I ordered it from. Great company and quick shipping. I will also make a clip retainer for a 3/8" harness and add it to this when I get a chance just in case you can use a 3/8" harness. Enjoy. The STL's are the cover and two clips, .375 is the 3/8" opening and the .5 is the 1/2" opening. If you want other sizes, just contact me and I will make them. You will need two M2 X 16 screws like in the picture. The other screws are the stock screws supplied by Prusa. Easy install. Look at pictures. Link to wire sleeve. https://www.wirecare.com/interest/home-office/home-office-wire-protection-customization/f6-woven-wrap
Statistics
Likes
3
Downloads
0