First Born Helmets (Set of 8) Pull Ball Chain, Keychain Knob | Handle | Fob | Finials
Description
This set of 8 Ceiling Fan / Light pull chain, ball chain, pull string knobs, handles, finial, fobs are designed for use with standard #6 (3.2mm) ball chain. It will also work with smaller chain as long as you use a #6 metal connector. MOST OF THESE SHOULD PRINT WITHOUT SUPPORTS except the one with spikes on the helmet - but haven't test printed these yet. Simple feed the chain through the top of the print and attach a standard #6 connector to it. If using a ball chain and metal connector, you can form a loop around a keyring and hook with the other end of the connector. If you don't have a metal connector, you can print the BALL-CONNECTOR.stl file I've included. NOTE: if you print the connector in PLA it's a tight fit. Lay the chain on a hard surface, position the connector over the last ball of the chain and push down until it snaps in place. You may also use string with a large knot tied in the end. I usually print things with 10% infill - HOWEVER, if used on a ceiling fan, you may want to use a higher infill for more weight. If you like this remix, check out the original models listed in the left sidebar. If you want to see all the pull chain, keychain fobs I have remixed, use this link: https://tinyurl.com/y6tqvn4e I have designed over 500 remixes of various types. If you want to search by the type, visit my profile: https://www.thingiverse.com/ToaKamate/about
Statistics
Likes
16
Downloads
0