[Runescape] Duellist's Cap T6

Description

## Duellist's Cap From Runescape3 ---------------------------------------------------------- ####My designs are fully print-ready, All detached/Floating elements have been attached using small rods that have been made apart of the model. ####I have made all my designs at the minimum scale of the standard 0.4mm nozzle, So I strongly recommenced you scale up the models before printing. (They should print just fine at their default scale if you have your printer calibrated correctly). ####All my models (with the exception of a few) should be printed with supports enabled. I also recommend changing the following settings: ***• Layer Height: 0.1mm*** ***• Support Horizontal Expansion: 1-2mm*** ***• Support Placement: Touching Buildplate*** ***• Support Roof: Enabled*** ***• Support Roof Density: 100%*** ***• Support Roof Pattern: Concentric*** ####Thanks for taking the time to print my models, I would appreciate people posting their makes! ---------------------------------------------------------- ####Notes for this model: ***• N/A*** ----------------------------------------------------------

Statistics

Category

Tags