Raspberry Pi IR Camera Mount & Flexi-Arm Mount
Description
This is a remix combining two other designs (that don't belong to me) to make them integrate nicer: * modified the back case of [ Raspberry Pi Night Vision Camera Mount (incl. Infrared spots)](https://www.thingiverse.com/thing:2737276) and added compatible size ball joint, and two little air slots. * You probably will want supports touching buildplate. * **You will need the front case from the original thing.** * modified the snap (extrusion) mount of [Flexi-Arm Camera Mount](https://www.thingiverse.com/thing:4212206) and added an elongated arm with ball joint. * Preferably print with 3 or 4 walls for strength and stability. * Also added an alternative 'sturdier mount'. * **You will need the ball joint links from the original thing.** * modified links to have long arms as an alternative; see last photo. The regular ball joints cannot carry the weight if there are too many of them, so this is an alternative solution. I printed them at 0,24mm layer height but I'd imagine you can get away with anything from 0,15mm to 0,30mm. Update: The links I printed in PLA+ had too brittle joints leading to most of them getting cracks and loose. So I'd recommend printing in PETG.
Statistics
Likes
33
Downloads
0