S800 Nose and Canopy for Runcam Phoenix 2 and GoPro HERO7 - VERSION 2
Description
Update 2020-07-24 Enlarged the cutout for the HERO7 0.25% as it was a bit tight. The Phoenix 2 camera is an uncased camera, DONT FORCE IT TO FIT! The cutout for the phoenix 2 is designed for a loose fit but some printers might print it tight, in case of this remove some material from the nose first! Especially from the back where the camera is extra sensitive. Nose for S800 sky shadow with camera mount for Runcam Phoenix 2 with the 2.1mm lens and GoPro HERO5, HERO6 and HERO7. This is my own design but its inspired buy PlayerOneFPV. Credits to Robschii for designing the 4s Haube that I modifyed with hinges. Credits to Oscarko for the GoPro Hero 7 model that I used for cutting. The Phoenix 2 model used for cutting is designed by myself. Use 100mm of piano wire or similar for the hinge. Nose is printed on its back with the camera pointing up, supports everyware. canopy is printed standing up with the hinges pointing up, supports everyware. I used a 10mm brim when printing the canopy in petg, good bed adhesion is manditory! Use the print settings and orientation described here https://www.thingiverse.com/thing:4008697
Statistics
Likes
4
Downloads
0