Nerf Trilogy Hopper Mod: The Gunslinger MK1 (WIP)
Description
This is a nerf trilogy hopper mod.because who doesn't want the ability to actually shotgun load the nerf trilogy? this hopper will allow you to load 3 shells into the top of your trilogy plus one in the chamber, as well as store 2 in the top of the mod. but more importantly: It has a tacticool iron sight. heck yeaaaaaaah!!!!!! IT HAS NOT BEEN TESTED YET. BE WARY, AND LET ME KNOW HOW AND IF THE MOD WORKS IF YOU DECIDE TO PRINT THIS. you will need rubber bands for this to work. the rod with the hooks goes into the slit at the center of the hopper. You'll know if it's the right hole. the mod attaches to the top of the trilogy by ziptieing the device with the holes located near each of the sling mounts on the trilogy. you can also glue it on your trilogy, but this is not recommended at this stage of development. you will also need to tie either elastic, or rubber bands to the front 2 holes of the mod and onto the rod hooks. THIS PRINT WILL REQUIRE A SIZABLE PRINTER, FEEL FREE TO SPLIT IT APART IF NEED BE. Print the rod on it's side, and print the hopper upright, with the smoothest surface on the printer bed. now for the most important question: Does it take a K26? Sadly, it doesn't take a K26.
Statistics
Likes
10
Downloads
0