Ford FlatHead V8 (11/14) / Supercharger extension
Description
This is an Supercharger extension for the Ford FlatHead V8 (https://www.thingiverse.com/thing:2537602). Then come the carburetor and the air intake. Video : https://youtu.be/RZmVCxzOg90 # Release 25/03/2020 : New SuperchargerPulleyV2 (it replace SuperchargerPulley) with deeper groove to prevent the belt from jumping. 30/03/2020 : Change the position of the supercharger to rotate the two helical screws in the correct direction. The support of the two pulleys of Intake Manifold is also updated (see https://www.thingiverse.com/thing:4214349). # Print Settings 1 x SuperchargerBack : Layer:0.15mm Raft:no Brim:no Support:yes Infill:20% 1 x SuperchargerBackGasket : Layer:0.15mm Raft:no Brim:no Support:no Infill:100% 1 x SuperchargerBody : Layer:0.15mm Raft:no Brim:no Support:yes Infill:20% 1 x SuperchargerBodyGasket : Layer:0.15mm Raft:no Brim:no Support:no Infill:100% 1 x SuperchargerFront : Layer:0.15mm Raft:no Brim:no Support:yes Infill:20% 1 x SuperchargerFrontGasket : Layer:0.15mm Raft:no Brim:no Support:no Infill:100% 1 x SuperchargerGear1 : Layer:0.15mm Raft:no Brim:no Support:no Infill:30% 1 x SuperchargerGear2 : Layer:0.15mm Raft:no Brim:no Support:no Infill:30% 1 x SuperchargerGear2Spacer : Layer:0.15mm Raft:no Brim:no Support:no Infill:30% 1 x SuperchargerPulley : Layer:0.15mm Raft:no Brim:no Support:no Infill:30% 1 x SuperchargerScrew1 : Layer:0.15mm Raft:no Brim:no Support:no Infill:20% 1 x SuperchargerScrew1Spacer : Layer:0.15mm Raft:no Brim:no Support:no Infill:100% 1 x SuperchargerScrew2 : Layer:0.15mm Raft:no Brim:no Support:no Infill:20% 1 x SuperchargerScrew2Spacer : Layer:0.15mm Raft:no Brim:no Support:no Infill:30% 1 x SuperchargerGearTester (optional) : Layer:0.15mm Raft:no Brim:no Support:no Infill:100% 1 x SuperchargerBelt : Layer:0.20mm Raft:no Brim:no Support:no Infill:100% Printed with NinjaFlex # Accessories 5 x 6701zz bearing 2 x m3 jam nut 2 x m3 lock nut 2 x m3 washer 30 x m3 threaded insert 10 x m3x20mm SHCS 20 x m3x10mm SHCS 4 x 4mmx2mm disk magnet 1 x 2mmx100mm rod 1 x 2mmx160mm rod 1 x 3mmx105mm threaded rod 1 x 3mmx167mm threaded rod # Mounting Look at pictures.
Statistics
Likes
70
Downloads
0