Ender 3 - Raspberry Pi Touchscreen Articulating Arm Mount
Description
Hey Guys - This is a custom design which may be used to combine the [3D printed articulating LED lamp](https://www.thingiverse.com/thing:2505394) project with the [CR10 Ender 3 Raspberry PI 7 Touchscreen Mount](https://www.thingiverse.com/thing:3074081) project thus allowing you to mount a Raspberry Pi Touchscreen onto your Ender 3 *(or something else)* using an articulating arm mount. I've successfully printed and have almost finished assembling it so will post a picture once complete. If needed, below is a list of all files I personally printed to get mine set up on the side of my Ender 3 Pro. *Note: I didn't have any spare T-nuts, so printed a couple which are listed below as well...* - **Ender 3 - Raspberry Pi Touchscreen Articulating Arm Mount** *(This project)* - (x1) Articulating\_RasPi\_TSMount.obj - **[CR10 Ender 3 Raspberry PI 7 Touchscreen Mount](https://www.thingiverse.com/thing:3074081)** - (x1) surround.stl - (x1) brackets.stl - (x1) upper_mount.stl - **[3D printed articulating LED lamp](https://www.thingiverse.com/thing:2505394)** *(You can mix, add, or whatever depending on desired end result)* - (x2) arm-mixed-140.stl - (x4) knob.stl - (x1) wall_mount.stl - (x1) wall_joint.stl - (x1) screw.stl - **[T-nut M3 drop-in rotating 2020 V-Slot (Tevo, Creality, Tronxy, Anet)](https://www.thingiverse.com/thing:3050607)** - (x2) T-nut\_M3\_x1.stl I haven't tried printing without supports, but including them only adds a couple of minutes. Thanks to the authors of the referenced projects above for their work with their initial designs. Enjoy!
Statistics
Likes
9
Downloads
0