Colour shaker for all sizes (vallejo, citadel, MIG etc)
Description
So this is basically a shaker for vallejo, citadel and basically any color that comes in a plastic bottle. It can take many different sizes. Fix the color with one of the screw, then connect a power tool to the shaft. BOM: 4x M8x25 screw (M8x20 are fine as well) 1x M8x20 (can't be longer) 1x M8 threaded rod 3x M8 nut 3x M4 or M5 screw 1x M8 tap 1x M4 or M5 tap assemble: tap M8 holes in any of the holes you can tap. Tap M5 holes in the big block that will hold the colors. It is possible that M4 screws will just fit but I think it's better to tap holes Small bar goes to the threaded rod, long bar goes to the big block. The rest is quite straightforward. Remember things have to move, leave some gap between the parts. Use thread locker for all screws, vibrations are quite important. Enjoy. https://www.youtube.com/watch?v=r92ClYjjhg0&
Statistics
Likes
31
Downloads
0