COVID blaster 99.99%

Description

There should be a "Yes-ish" option for supports. I designed and perfected this under the infuence of alcohole. I am writing this under the influence on alcohol. Nailed it. Print this b**** however you want, it's still gonna be sick and keep you from getting sick. Realistically, .2 LH worked well for all parts. (If you're not using Cura. I don't know your language so figure it out) Print the BODY thread, or "muzzle" up with supports from the build plate ONLY. If you select "everywhere" you will f*** yourself. The trigger should be printed on it's side. Because expediency. It's faster this way. Print it on it's side with supports EVERYWHERE. Mint. BTW enable support interface, stop hurting yourself. Print the THING in any way you want. But you'd be an idiot if you printed it without the chamfered end up. You'll have to chuck it up in a drill and give it a nice concentric point (rounded or not) with sand paper or something abrasive. You'll need a pen spring by the way. That pushes on the THING. ASSEMBLY: 1: Pull the end off the hand sanitizer bottle, the part that isn't anywhere in any picture, there's a ball bearing in there. Get rid of it, or keep it. Your choice. 2: Unscrew the pump apparatus from the bottle. 3: Realize step 1 and 2 could be reversed. 4: If you haven't printed everything, you should have. 5: Fill the reservoir with life saving hand sanitizer 6: Drop the THING into tube shaped hole orifice the pump handle left. Then put the spring on top of it. 7: Push the end of the pump apparatus into the TRiGGER, you may have to sand the OD of the plastic and motivate it with some pliers. I designed it to be like this. For fun. 8: I'm having another beer this is a lot of steps. 9: Make sure the trigger slides into the rail easily. If it doesn't sand it where it needs it. (probaly the corners) Also a little oil helps it slide along. 10: Test fire with the muzzle pointed up. 11: If it didn't work, you did something wrong. 12: If it did shoot life saving hand sanitizer, proceed to step 13 13: Shout "HAIL MOST BEAUTIFUL AND OMNIPOTENT FLIMFLAMMACHINE" By the way, you might have to prime it by "firing" upwards before dispensing life saving hand sanitizer.

Statistics

Category

Tags