Visible Hot End Alternate Brackets. Hood Compatible with reduced clearances.
Description
*work in progress* I will fix the missing and sideways pics shortly. its late and i need to go to bed This is a remix of the visible hot end bracket by E5VH2 I realize it looks very different, but that was what inspired this make and this was trying to achieve the same basic goal. I needed clearance for the partametric hero me dual fan duct. it sticks out forward slightly further and hits the OEM L-bracket The hero me dual fan shrouds are also slight wider so this will give better clearances with the forward rail bracket (see pictures) This will allow useage of the Hood bracket by JoeSainz with the modified version I have included. Use a M5 x 35mm allen key bolt and go through the hood bracket and visible hotend bracket into the end of the vertical 2040 rail. *make sure to put the other M4 x 8mm bolt in first though* The front rail's vertical position is adjustable with this bracket system. Kinda nice if you also have the tool holder and your filament snips tend to poke you in the face when you lean in to look closely at you pending print :) You will need to use a 0.169" or 5mm drill bit to open the end of the rail, the thread with a 5mm x .8 pitch tap. alternatively(but not recommended) you can just omit that bolt because there are sufficient other attachment points on the bracket. Its your call.
Statistics
Likes
2
Downloads
0