Tevo Tornado/Creality CR10 Single Motor Dual Z w/ Tensioner

Description

This is a great upgrade to get rid of slop in your Z axis movement on the Tevo Tornado and Creality CR10 printers. It's simple to print, clean, easily adjustable, and takes less than 5 minutes to install with just the tools your printer comes with, and a small wrench, socket wrench, or pliers. For this mod, you will need an M3 and M5 tap for the pulleys and top bracket. Use the original lead screw on the new, belt driven side, and the 525mm lead screw on the motor driven side. Parts List: (Printed) -2x tt_dual_z_45_tooth_pulley -1x tt_dual_z_top_bracket -1x tt_dual_z_lower_bracket -1x tt_dual_z_tensioner (Purchased) -4x M3x4mm Set Screws -5x M5x8mm BHCS -1x M5x16mm BHCS -1x M5x22mm BHCS -2x M5x35 BHCS or SHCS -3x M5 Hex Nut -4x M3x14mm SHCS -4x M3 Hex Nuts -4x 20 series M5 T-Nuts (3 drop in and 1 roll in are the easiest, unless you ignore the horizontal screw on tt_dual_z_top_bracket): Drop in: https://amzn.to/3dkQB15 Roll in: https://www.mcmaster.com/5537t75 -1x 525mm T8 Lead Screw (or 600 cut to length with an angle grinder): 525mm: https://banggood.app.link/JDEd0TFXZ4 600mm: https://amzn.to/3a7iFTn -1x T8 Lead Screw Nut (should come with your lead screw) -1x 810mm Closed Loop GT2 Belt: https://amzn.to/3bdazsE -1x KFL08 Flange Block Bearing: https://amzn.to/2J3DkvU -1x 5mm Bore GT2 Idler Pulley (May add a printed alternative): https://amzn.to/2U6jTIQ

Statistics

Category

Tags