Multi color emojis
Description
I recommend you print these with a layer height of 0.2 mm with 3 (0.6 mm) top/bottom layers. The first layer is 1 mm thick, the consecutive layers are 0.6 mm. Change the filament color according to color_order.jpg at the ~end~ of layers 5, 8, 11, and 14 depending on how many colors are required. All objects have a diameter of 70 mm. The height depends on how many colors are required. When scaling make sure the height stays the same. These files are based of [Microsoft's emoijs](https://emojipedia.org/microsoft/)
Statistics
Likes
9
Downloads
0