Tabletop Miniature Painting Handle
Description
**UPDATE** I’ve made a new version of this that can be found here: https://www.thingiverse.com/thing:4384320 After recently joining a Dungeons and Dragons party I found I needed a better way to hold a mini for painting. After getting a little restless while social distancing, I opted to design a handle of my own. This prints in 3 parts. You will need to print the clamp file twice if you print the parts individually. I've also included a file with all three pieces. I recommend printing each part vertically, for the clamp file that would be oriented so that the round cut out is pointing up. After printing you just need a rubber band and a mini to paint. I found that the clamp pieces have a tight fit at first but after being pushed in and slid back and forth a few times they loosen up and move smoothly. **Quick Note** If you have an issue scaling the models, with them coming out too small, the height of the handle standing is 85.2mm and the height of the clamp standing is 43.53mm. I've uploaded revised files for the handle and clamp pieces which shouldn't need resizing. Hopefully these work better with less to no confusion. If you make one please post a picture!
Statistics
Likes
25
Downloads
0