Adjustable Z-axis Endstop for Sapphire Pro
Description
Adjustable Z-axis Endstop. ================= Print items. Check thread quality. Parts must be twisted without backlash. Changelog --------- 2020-04-04 - V2. Added bearing lock sleeve. Glue cone to item with male thread. 2020-03-22 - Initial upload. Install: ======== -Deattach the top plate of the printer, remove Z-axis Endstop. -Put on the adjuster and fix it to the bearing with paper scotch. -Set the nut by heigh in the middle position. -Assemble the printer and adjust the position of the Z-axis Endstop as usual. -If necessary, now you can adjust the clearance along the Z axis by rotating the nut. One full turn of the nut is 1 mm. Turn by one division - 0.05 mm. You can modify geometry if nesessary by source (OpenSCAD). Have a good print !!!
Statistics
Likes
6
Downloads
0