Element Enduro Front Wheel Wells
Description
Here is a set of from wheel wells specifically designed for the Element Enduro with an Injora body. There are two versions: 1. The first version has a peg that drops into the body post hole. The front of the wheel well gets bolted on at the front bumper mount (second hole) 2. The second version has a hole where the body post can pass through. While identical to the first version, the second version has not been tested with any specific body. ### Both designs are the RIGHT side ### • Flip the design in your slicer to get the other side. The recesses in the front are for the light buckets of the Injora bodies. The wheel well stops at the battery mount, and does not go all of they way down to the tray. The side of the wheel well goes between the shock tower and the servo, it might be necessary to loosen the servo screws and nudge the servo over a little bit. Recommend printing these with minimum infill.
Statistics
Likes
33
Downloads
0