large hair comb
Description
Another hair comb, this one a copy of a different one my mom has. Made in tinkercad. **To get the same shape as the model combs, all stl files will print flat and need to be heat formed in hot water.** See https://www.instructables.com/id/Thermoforming-3D-Printed-PLA-for-Use-in-Prostethic/ (not mine, just a really nice set of basic instructions) for good, clear instructions on this method. Like my other combs, this one needs post-print heat forming. However, due to the very flat design, there's less sanding necessary to make them wearable. With a really smooth print, none at all is necessary. I still like the finish I get with a resin coat or several coats of sprayed on clearcoat, but if you want to print, form and wear, that's possible with these. The two files are for a comb with lots of teeth that prints at just under 6" wide and a wider spaced, broader toothed comb that can be made narrower if desired.The current photo model is the toothier version. Feel free to print and remix!
Statistics
Likes
9
Downloads
0