Apple Pencil Desk Stand
Description
I use my Apple Pencil far too much and I put it down far too often as well. I have wanted to put the pencil on my desk much like I put my soldering iron-- at an angle. I designed this to look similar to ball point / fountain pen like stands. ~~Still working on the fit!~~ Tested with Apple Pencil Gen 1 and Apple Pencil Gen 2 ###Files to Print: - x1 ` Apple Pencil Holder.stl `, any material - x4 `tpu feet.stl`, if you would like more grip and less slip on your desk/table ###TPU Feet Installation: **The feet are not necessary for the thing to work! ** I assembled the part by printing the parts, and then with the _ball side in_, I added a dab of hot glue to hold everything together. It should be a tight fit. Make sure that the TPU flat side is on your table as the ball end is only to help adhere the TPU to the hot glue! --- **Update 4/2/20: ** - Moved the thing from "in progress" to complete - Made the fit slightly better, make sure your printer is calibrated well - Increased the base of the height-- makes it feel more 'premium' - Added TPU feet (not needed) ** Update 4/420: ** - According to someone who printed this, it also works with the Gen 2 pencil! **Update 4/8/20: ** - Made the TPU feet slightly larger and deeper - The base of the extrusion (where the tip of the pencil sits) is now slightly larger to allow for easier removal
Statistics
Likes
41
Downloads
0